Learn what the E01, E03, E04 and E05 error codes, and various error symbols mean on the Gaggia Anima.
| Symbol | Brief Description |
|---|---|
 |
Put back the drip tray and coffee grounds drawer; close the service door. |
 |
Coffee bean hopper empty. |
 |
Brew group not inserted. |
 |
The machine is out of service. |
 |
Coffee grounds drawer full. |
 |
Water tank empty. |
 |
N/A |
 |
The machine is ready to brew products: coffee bean hopper empty |
 |
The machine is ready to brew products: replace the INTENZA+ water fi llter |
 |
The machine is waiting to start the water circuit priming process. |
 |
The milk carafe ducts should be cleaned. |
 |
The machine must be descaled. |
 |
The machine is heating up. |
 |
The machine is rinsing. |
 |
Brew group rebooting. |
| Machine Out of Service | Description |
|---|---|
 |
If the machine error alarm signal is triggered, the error code is displayed in the bottom right corner of the display. XX (Following table) |
| Error Code | Behavior | Cause | Solution |
|---|---|---|---|
| 1 | Coffee grinder blocked | Coffee outlet duct clogged | Clean the coffee outlet duct thoroughly. |
| 3 - 4 | Brew group locked, cannot be taken out | The brew group is incorrectly positioned. | "Close the service door. Turn the machine off and back on again. Wait for the ‘Ready for brewing’ signal and then remove the brew group." |
| 5 | Water circuit error | Air in the water circuit | "Remove and restore the water tank a couple of times, making sure to position it correctly. Check that the water tank seat is clean." |