What do the Error Keys mean on the Gaggia Anima?

Learn what the E01, E03, E04 and E05 error codes, and various error symbols mean on the Gaggia Anima.

Symbol Brief Description
Anima error 1.PNG Put back the drip tray and coffee grounds drawer; close the service door.
Anima error 2.PNG Coffee bean hopper empty.
Anima error 3.PNG Brew group not inserted.
Anima error 4.PNG The machine is out of service.
Anima error 5.PNG Coffee grounds drawer full.
Anima error 6.PNG Water tank empty.
Anima error 7.PNG N/A
Anima error 8.PNG The machine is ready to brew products: coffee bean hopper empty
Anima error 9.PNG The machine is ready to brew products: replace the INTENZA+ water fi llter
Anima error 10.PNG The machine is waiting to start the water circuit priming process.
Anima error 11.PNG The milk carafe ducts should be cleaned.
Anima error 12.PNG The machine must be descaled.
Anima error 13.PNG The machine is heating up.
Anima error 14.PNG The machine is rinsing.
Anima error 15.PNG Brew group rebooting.

 

Machine Out of Service Description
Anima error 16.PNG If the machine error alarm signal is triggered, the error code is displayed in the bottom right corner of the display. XX (Following table)

 

Error Code Behavior Cause Solution
1 Coffee grinder blocked Coffee outlet duct clogged Clean the coffee outlet duct thoroughly.
3 - 4 Brew group locked, cannot be taken out The brew group is incorrectly positioned. "Close the service door. Turn the machine off and back on again. Wait for the ‘Ready for brewing’ signal and then remove the brew group."
5 Water circuit error Air in the water circuit "Remove and restore the water tank a couple of times, making sure to position it correctly. Check that the water tank seat is clean."

 

Was this article helpful?
1 out of 2 found this helpful