How To Troublshoot Grinding Issues On ECM S-Automatik 64 Grinder

Resolve grinding issues on the ECM S-Automatik 64 grinder.

Grinds Coarse/Inconsistent

If you find that your ECM S-Automatik 64 is dispensing coarse grinds, or that the grind has been inconsistent, review the following to resolve the issue.

  • If the machine is on a fine setting and the grinds are still coarse, or if the machine is producing grinds of all different sizes, then the grinder is out of calibration or needs to be cleaned.
  • Oily, caramelized, or flavored beans can cake up on the burrs and push them out of calibration, so these beans should be avoided.
    • Additionally, adjustments to the grind fineness should only be made while the grinder is running. Moving the burrs closer together for a fine grind will cause them to press against any bean fragments or grinds already in the grinder.
      • If the burrs are moving, those fragments get ground up and brushed aside.
      • If the burrs aren't moving, then they will press into those fragments and cause the burr to get pushed out of alignment.
  • If the grinder is older, or if something was put through the grinder that is not meant to be put in it, the burrs may be worn out. If cleaning and calibrating the grinder is not resolving the behavior then it may be time to replace the burrs.
Was this article helpful?
0 out of 4 found this helpful