My PID is missing segments or PID is not coming on
If the PID on your ECM Synchronika is not coming on or turning on, or seems to be missing numbers, segments, or sections, review the following to troubleshoot the issue.
- Inspect the wires in the back of the PID to make sure they are full in the connectors and the connectors are all tight and nothing is unplugged.
- If the display is missing segments or flickering and the connections are all fine, replace PID.
- If the display is blank, testing for voltage from the board to the PID is necessary to determine if the control board has failed, or the PID has failed.