How to Remove the Housing on the Expobar Brewtus IV

Removing the Housing on Your Machine

Sometimes while troubleshooting, it can be necessary to go inside your Expobar Brewtus IV, meaning that you'll have to remove the housing to access certain components. Whether to inspect for an unfamiliar noise, an ever elusive leak, or just for routine maintenance. You won't need to remove the housing of your machine for every scenario, but the attached instructions below will walk you through how to do so. If you don't feel comfortable working inside of your machine, feel free to contact a member of our technical support team for further assistance.

Was this article helpful?
0 out of 0 found this helpful