How to Complete a Manual Rinse Cycle on the Gaggia Magenta Prestige

Learn how to complete a manual rinse cycle on the Gaggia Magenta Prestige.

During the first installation or after a long period of machine inactivity, a manual rinse cycle must be carried out.

1. Place a container under the coffee dispensing spout, scroll through the different pages and select a “ESPRESSO LUNGO”.

How_to_Complete_a_Manual_Rinse_Cycle_on_the_Gaggia_Magenta_Prestige_1.PNG

2. Press the "How_to_Complete_a_Manual_Rinse_Cycle_on_the_Gaggia_Magenta_Plus_1.PNG" button until "How_to_Complete_a_Manual_Rinse_Cycle_on_the_Gaggia_Magenta_Plus_2.PNG" is selected, without adding pre-ground coffee.

How_to_Complete_a_Manual_Rinse_Cycle_on_the_Gaggia_Magenta_Plus_4.PNG

3. Press the Start/Stop button to start dispensing. The machine will dispense hot water.

How_to_Complete_a_Manual_Rinse_Cycle_on_the_Gaggia_Magenta_Plus_5.PNG

4. Empty the container and make sure that the hot water dispensing spout is installed.

How_to_Complete_a_Manual_Rinse_Cycle_on_the_Gaggia_Magenta_Prestige_2.PNG

5. Place the container under the steam wand and select "HOT WATER".

6. Press the Start/Stop button to start dispensing.

7. Empty the container and repeat steps 5 to 7 until the water tank is empty.

8. When finished, refill the water tank to the MAX level. The machine is now ready for use.

Was this article helpful?
0 out of 0 found this helpful