Learn to clean and remove steam and hot water valves on Quick Mill Pathfinder.
How to Remove, Clean and Lubricate Your Steam and Hot Water Valves
Removing, cleaning and lubricating your valves can be a quick fix for a leaky or sticky valve and is an essential part of properly maintaining your Quick Mill Pathfinder. You will be required to remove the housing from your machine. Watch this video to learn how to rebuild the steam and hot water taps (valves) of the Quick Mill Pathfinder espresso machine.
DISCLAIMER: Do NOT use any chemical cleaning products. This can strip the chrome plating from the valve. Soap and hot water will be sufficient for cleaning the valve.
Once you’ve sufficiently cleaned and lubricated the valve, you can reassemble to finish the process.
Note: Although the machines featured in the video below are the Expobar Brewtus & Exbobar Office Lever Plus, the Pathfinder is similar enough that the process described will work for each machine.
How to Rebuild Steam & Hot Water Taps