How to Resolve Low Brew Or Steam Temperature on Profitec Pro 800

Troubleshoot brew or steam not being hot enough on Profitec Pro 800.

Brew Or Steam Not Hot Enough

If the brew water or steam pressure aren’t high enough on your Profitec Pro 800, you may be able to resolve the issue by adjusting the temperature using the PID controller.

You can use the instructions on page 24 of your user manual to raise the set temperature of the boiler. Raising the temperature too far puts the boiler at risk of over-pressurizing, which will cause the relief valve to open and vent steam from the top of the machine. If the steam pressure gauge moves past 1.2 bar then the temperature will need to be lowered. Since this is a single boiler machine steam and brew temperatures are interrelated, raising one raises the other.

Was this article helpful?
0 out of 0 found this helpful