How To Troubleshoot No Flow Through the Grouphead on an ECM Casa V

Resolve issues with lack of flow through ECM Casa V Grouphead.

I Have No Water Flow At All From The Group

If you're trying to use your ECM Casa V, but you find that there's no water dispensing from the grouphead, or your Casa V is unable to brew, review the following.

  • When you press the brew button does the pump activate? If it does not then it could be either a bad brew switch, bad pump, or a wire has come off.
  • If the pump is making a low hum it could be that the pump needs to be primed, there is a blockage present in the system, or the pump has failed.
  • If the pump sounds as if it is under pressure, open the steam/hot water valve, does water come out just fine? This is likely a result of a stuck or blocked brew solenoid.
Was this article helpful?
0 out of 1 found this helpful