BWT Aquameter: Flashing Display

Learn what to do if the display on a BWT Aquameter is flashing. 

If your machine gets up to full steam temperature but the coffee temperature is low and the group is not as super hot as it used to be, then you are probably having an issue with the thermal syphon, so water is not flowing through and heating the group as it should.

If you can take off the top tube leading into the top of the brew group you will find a restrictor. It may be plugged up a little. Clean it out with a brush or descaler and it may fix the issue. You can find the restrictor on the end of part number 6, shown below:

BWT_Aquameter_Flashing_Display_restrictor_location.png

Was this article helpful?
0 out of 2 found this helpful